Water WellRotary

NGE Drillsol • Water Well

NGDR1000 Rotary Drilling Rig

500 m direct rotary drilling rig for water well and large-diameter drilling applications.

Engineered for professional drilling applications and project-specific requirements
Request Technical DetailsDiscuss NGDR1000
Primary category:Water Well
NGDR1000 Rotary Drilling Rig drilling rig by NGE Drillsol

Model

NGDR1000

Drilling Capacity

500 m

Drilling Capacity
500 m
Hole Diameter
200–1500 mm
Pull Up Capacity
40,000 kg
Prime Mover
188 HP Ashok Leyland
Machine Gallery

NGDR1000 in Detail

Explore the machine configuration, engineering details and overall design of the NGDR1000.

1 / 7
ngdr1000 drilling rig - photo 1
NGDR1000 at a Glance

NGDR1000 Key Specifications

A summary of the published technical characteristics available for the NGDR1000 drilling rig.

Drilling Capacity
500 m
Hole Diameter
200–1500 mm
Pull Up Capacity
40,000 kg
Prime Mover
188 HP Ashok Leyland

Engineering note: Actual drilling performance and capacity can vary with geological formation, drilling method, tooling, bore diameter, operating configuration and site conditions. Final machine selection should be based on the complete project requirement.

NGDR1000 Overview

What is the NGDR1000?

The NGDR1000 Rotary Drilling Rig is part of NGE Drillsol's Water Well, Rotary range. 500 m direct rotary drilling rig for water well and large-diameter drilling applications.

Product Overview

NGDR1000 Rotary Drilling Rig

The NGDR1000 is a direct rotary drilling rig with a catalogue-rated drilling capacity of 500 m, mechanical rotary table drive and 40,000 kg pull up capacity.

Water WellRotary

Is the NGDR1000 Suitable for Your Project?

Final suitability should be evaluated against the actual drilling conditions of your project, not by model capacity alone.

Formation and ground conditions
Required drilling depth
Target bore diameter
Selected drilling method
Tooling and power requirements
Discuss the NGDR1000
Engineering Advantages

Key Features of the NGDR1000

Designed around the practical requirements of demanding drilling projects, with configuration and capabilities selected for the intended application.

01

Direct Rotary Drilling

Designed specifically for direct rotary drilling applications.

Engineering Feature
02

500 m Capacity

Catalogue-rated drilling capacity of 500 m.

Engineering Feature
03

Large Diameter Capability

Supports the catalogue-listed range up to 1500 mm.

Engineering Feature
04

Flexible Mounting

Available in truck, trailer and skid configurations.

Engineering Feature

Project-specific configuration: Final machine configuration, tooling and auxiliary equipment can depend on drilling method, formation, bore diameter and customer project requirements.

Technical Data

NGDR1000 Technical Specifications

Published technical parameters and machine specifications for the NGDR1000 drilling rig.

Rig Model

NGDR1000

Operation
Direct Rotary
Drilling Capacity
500 m
Hole Diameter Range
200–1500 mm
Drive Mode
Mechanical Rotary Table
Pull Up Capacity
40,000 kg
Mud Pump
6×10 Dual Acting Duplex
Prime Mover
188 HP Ashok Leyland
Mounting Options
Truck, Trailer, Skid

NGDR1000 specification note

Specifications shown represent the published configuration for this model. Actual performance, drilling capacity and equipment configuration can vary according to formation conditions, drilling method, tooling, bore diameter and project requirements. Confirm the final technical configuration with NGE Drillsol before ordering.

Applications

Where the NGDR1000 Fits

Explore the drilling and engineering applications for which this rig can be considered based on its published configuration.

Project Selection

The final rig selection should consider formation, required depth, bore diameter, drilling method, tooling and project conditions.

01

Water Well Drilling

Suitable for water well drilling projects.

Application Category
02

Direct Rotary Drilling

Designed for direct rotary applications.

Application Category
03

Large Diameter Boring

Suitable for projects requiring large bore diameters.

Application Category

Not sure if NGDR1000 is right for your project?

Share your target depth, bore diameter, formation, drilling method and project location with our team. We can evaluate the requirements and recommend the appropriate configuration.

Discuss Your Project
Machine Systems

Major Equipment & Systems

Key systems and equipment associated with the published configuration of the NGDR1000.

System 01

Rotary System

Mechanical rotary table

System 02

Mud System

6×10 dual acting duplex mud pump

Configuration & project requirements

Auxiliary equipment, tooling and system configuration may vary according to drilling method, formation, borehole requirements and the final project specification.

Performance

NGDR1000 Performance Highlights

Key published performance figures for the NGDR1000 configuration.

Drilling Capacity

500 m

Pull Up Capacity

40,000 kg

Performance depends on project conditions

Published performance figures are reference values for the stated machine configuration. Actual drilling performance can vary with formation, drilling method, bore diameter, tooling, operating parameters and site conditions.

Start Your Inquiry

Looking for the NGDR1000?

Tell us about your drilling project and our team can discuss the appropriate machine configuration, tooling and commercial requirements.

Required drilling depth (m or ft)
Target bore diameter (mm or inches)
Formation / ground condition
Drilling method
Project location
Required quantity

International enquiries welcome. Share your project requirements and our sales team can help you evaluate the appropriate NGE DRILLSOL rig.

Get in Touch

Request NGDR1000 Information

Choose the fastest way to send your requirements.

WhatsApp Sales

Send your project requirements

Email Enquiry

Send detailed requirements

Contact Our Team

Open the contact page

Enquiry Reference

NGDR1000